Protect-it MAXI: Structural Column protection to prevent damage from vehicle impacts.

PRODUCT INFORMATION

Protect-it MAXI™ column guards are supplied in a MAXIPAC consisting of 20 Protect-it MAXI’s and 8 Connecting Pins.
Each Protect-it MAXI™ has 4 pin location holes, two per side. Choosing the best pin location hole for the application will depend on the column size. Simply connect each Protect-it MAXI™ using the pins supplied and adjust the pin locations until Protect-it MAXI™ fits correctly around the column.
A more detailed assembly instruction and video can be found in the literature section.
ALL of the sizes below can be created from one or more Protect-it MAXIPACs.

Column Size Examples to be used as a guide only	MAXIPACs required for 0.5m (20”) high	MAXIPACs required for 1.0m (40”) high

100mm x100mm (4" x 4”) 150mm x150mm (6” x 6”)	0.5	1

200mm x200mm (8" x 8”) 225mm x225mm (9” x 9”) 250mm x250mm (10” x 10”) 275mm x275mm (11” x 11”) 300mm x300mm (12” x 12”) & rectangular combinations	1	2

300mm x300mm (12” x 12”) 325mm x325mm (13" x 13”) 350mm x350mm (14” x 14”) 375mm x375mm (15” x 15”) 400mm x400mm (16” x 16”) 425mm x425mm (17” x 17”) 450mm x450mm (18” x 18”) 475mm x475mm (19” x 19”) & rectangular combinations	1.5	3

450mm x450mm (18” x 18”) 475mm x475mm (19” x 19”) 500mm x500mm (20” x 20”) 525mm x525mm (21” x 21”) 550mm x550mm (22” x 22”) 575mm x575mm (23” x 23”) 600mm x600mm (24” x 24”) & rectangular combinations	2	4

ROUND 175mm (4”) ROUND 200mm (5”) ROUND 225mm (6”)	0.5	1

ROUND 175mm (7”) ROUND 200mm (8”) ROUND 225mm (9”)	0.75	1.5

ROUND 250mm (10”) ROUND 275mm (11”) ROUND 300mm (12”) ROUND 325mm (13”) ROUND 350mm (14”) increasing in 25mm increments	1	2

If your column isn't shown in our selection chart then please contact us for assistance.